Ways to Read Codes on a 1992 Dodge Caravan 1Locate the open port on the underside from the driver's dashboard close to the steering column auto diagnostics software. It is going to be the identical shape and size as the connective finish on the OBD I scan tool. Plug the scan tool into this port.2Put the important in to the ignition and turn it to the "II" position.
Don't start the engine.3Wait for the scan tool to turn on automotive diagnostic tools. Pick the command "Retrieve Codes" or some equivalent command. Wait for the scan tool to interface using the Caravan's laptop or computer. Write the alphanumeric codes it displays on a piece of paper.4Look up the codes in the scan tool's manual. Unplug the scan tool and have the vehicle serviced or repaired depending on the facts obtained from the codes. Ways to Read Codes on the 2000 Jeep Grand Cherokee 1Find the trapezoidal-shaped diagnostic link connector, which can be positioned towards the left of the steering wheel on the dash.
Plug the OBD II scanner into this port.2Put the crucial in to the ignition and turn it towards the "ACC" position. Be certain you don't begin the engine.3Turn on the scanner and wait while it retrieves the codes. On some scanners it's essential to press a command like "Retrieve Codes." In either situation, ultimately it is going to display alphanumeric codes on its screen.4Write down the codes on a piece of paper. Look up the codes in the scanner's operation manual. This will offer you the precise which means of each and every code.5Unplug the scan tool from the port and turn off the vehicle.
Related articles:
没有评论:
发表评论