Ways to Reset the Examine Engine Light on a 1998 Oldsmobile Achieva 1Turn the ignition crucial towards the "Off" position. Find the diagnostic connector Auto diagnostic tool. In the 1998 Achieva, and most other 1998 year model vehicles and light trucks, the connector is located beneath the driver-side of the dash, amongst the steering column and center console.
2Remove the plastic dust cover from the connector if it is actually nevertheless present. Plug the cable from the scan tool or code reader into the diagnostic connector. Turn the ignition crucial towards the "Run" position but usually do not commence the engine. The scan tool or code reader is powered by the vehicle's diagnostic connector.3Select "Generic OBD-II" from the scan tool key menu and " Obd2 scanner;Read Codes" from the initial submenu or press the "Read" button on the front with the code reader. Write down the number and definition of any stored difficulty codes.
This info may well be handy to diagnose complications inside the future.4Select "Clear Codes" from the scan tool submenu or press the "Erase" button on the code reader. Wait even though the scan tool or reader removes the code and resets the "Check Engine" light. A message will appear on the tool's readout indicating the process was profitable. Turn the ignition key towards the "Off" position and disconnect the scan tool or code reader. Test drive the Achieva to verify the difficulty code and check engine light usually do not return.
Related articles:
没有评论:
发表评论